Hear from Our Customers
You pull into a smooth, even driveway that doesn’t jar your car or spill your coffee. Your neighbors notice the clean lines and professional finish that actually improves your property value.
The asphalt holds up through Tennessee’s freeze-thaw cycles because we don’t cut corners on base preparation. Water runs off properly instead of pooling and seeping into cracks. You’re not calling for repairs in two years because we used proper thickness and quality materials from day one.
That’s what 50+ years of experience gets you—a driveway that works like it should.
We’ve been paving driveways in Wilson County since before most of our competitors existed. That’s not just experience—it’s proof we know how to build something that lasts.
As a veteran-owned company, we understand the value of doing things right the first time. We’ve seen Dixon Springs grow and change, and we know exactly what your soil conditions demand and how Middle Tennessee weather affects asphalt over time.
We’re BBB accredited because we stand behind our work. When you call, we answer. When we give you a timeline, we meet it.
First, we evaluate your existing surface and drainage. If there are issues with your base, we tell you upfront—not after we’ve started paving and you’re stuck with a bigger bill.
Next comes proper excavation and grading. This isn’t glamorous work, but it’s what prevents your driveway from cracking and settling later. We compact the base to specifications, not just “good enough.”
Then we lay asphalt at the right thickness for your specific traffic needs. We don’t stretch material to boost profits. The final step is proper compaction and finishing so you get that smooth, professional surface that handles everything from daily commutes to delivery trucks.
Ready to get started?
Every driveway paving job includes proper site preparation, quality asphalt materials, and professional installation. We handle grading, drainage considerations, and base compaction—the foundation work that most homeowners never see but absolutely determines how long your driveway lasts.
In Dixon Springs, we account for the local soil conditions and drainage patterns that can make or break a paving job. Your driveway gets the thickness it needs based on your actual usage, not some generic standard.
We also include proper edge work and transitions so your new driveway connects smoothly to existing surfaces. No awkward bumps or gaps that collect water and cause problems down the road. Clean, professional finishing that looks as good as it performs.
Most residential driveway paving projects in Dixon Springs take 1-2 days to complete, depending on size and complexity. Day one typically involves excavation, grading, and base preparation. Day two covers asphalt installation and finishing.
Weather can affect timing—we won’t lay asphalt in rain or when temperatures are too cold for proper curing. We’d rather reschedule than compromise the quality of your driveway.
You can usually drive on your new asphalt within 24-48 hours, but we recommend waiting a full week before parking heavy vehicles or RVs to allow complete curing.
For most residential driveways in Dixon Springs, we recommend 3-4 inches of asphalt over a properly compacted base. This provides the durability you need for daily car traffic and occasional delivery trucks.
If you have heavier vehicles like RVs, boats, or work trucks, we’ll increase thickness accordingly. Thinner asphalt might save money upfront, but it leads to premature cracking and costly repairs.
The base preparation is equally important—we typically use 6-8 inches of compacted gravel base, adjusted based on your soil conditions and drainage requirements.
Proper drainage is critical in Dixon Springs, especially given Tennessee’s weather patterns. We evaluate your property’s natural water flow and grade your driveway accordingly to direct water away from your home and prevent pooling.
If needed, we install drainage solutions like culverts or French drains before laying asphalt. We also ensure proper crown and slope so water sheds off the surface instead of standing and eventually seeping through.
Poor drainage is one of the main causes of premature asphalt failure, so we address it during the planning phase rather than hoping it won’t be a problem later.
We don’t cut corners on base preparation or material thickness. Many contractors save money by skipping proper excavation or using thinner asphalt, which leads to problems within a few years.
Our 50+ years of experience in Wilson County means we understand local soil conditions and weather challenges. We’ve seen what works long-term and what fails, so we build accordingly.
We’re also veteran-owned and BBB accredited, which means we’re accountable for our work. When issues arise, we address them promptly instead of disappearing like some out-of-town contractors do.
With proper installation and basic maintenance, your asphalt driveway should last 20-25 years in Dixon Springs. The key factors are adequate base preparation, proper asphalt thickness, and good drainage.
Regular sealcoating every 3-5 years helps protect against UV damage and extends lifespan. Prompt crack repair prevents small issues from becoming major problems.
The driveways we installed 20+ years ago are still performing well because we didn’t compromise on materials or installation methods. That’s the difference proper preparation makes.
We provide free, detailed estimates that break down exactly what’s included in your project. No surprise charges or vague line items—you’ll know what you’re paying for.
Driveway paving costs vary based on size, thickness, site conditions, and any drainage work needed. We price projects fairly based on the actual work required, not inflated estimates that get “adjusted” later.
Most Dixon Springs residential driveways fall within typical Middle Tennessee ranges, but we’ll give you an exact quote based on your specific situation rather than rough estimates over the phone.
Local Resources
Useful Links
Other Services we provide in Dixon Springs
